Chemical Element for JIS SCM440 round alloy steel bar
Physical Properties for JIS SCM440 round alloy steel bar
Surface Treatment: painting,plating,polishing,black oxide,transparent anti-rust oil
Heat treatment: Normalized / Annealed / Quenched / tempered
Processing
Electric arc furnace melting→refining furnace→vacuum treatment furnace→
→cast ingot→steel ingot anneal→ heating → high-speed forging, refining
forging→annel,retarded cooling,air cooling→quenching and tempering
treatment→finishing operation→test→finished products
Application:
Foodstuff, gas, metallurgy, biology, electron, chemical, petroleum, boilers, nuclear, energy, construction field, ships building industry, war and electricity industry, boiler heat exchanger, machiner and hardware fields and medical equipment, fertilizer, etc.
Standard |
Grade Number |
|
||||||||
GB | 42CrMo | C | Si | Mn | P | S | Cr | Ni | Mo | Cu |
ASTM | 4140 | 0.36-0.44 | 0.10-0.40 | 0.65-1.10 | ≤0.04 | ≤0.04 | 0.75-1.20 | - | 0.15-0.35 | ≤0.030 |
DIN | 42CrMo4 1.7225 | 0.35-0.44 | 0.15-0.30 | 0.70-0.90 | ≤0.035 | ≤0.04 | 0.80-1.10 | - | 0.15-0.25 | ≤0.025 |
JIS | SCM440 | 0.38-0.42 | 0.15-0.35 | 0.60-0.85 | ≤0.03 | ≤0.03 | 0.9-1.20 | ≤0.25 | 0.15-0.30 | ≤0.30 |
Physical Properties for JIS SCM440 round alloy steel bar
Physical Properties | |||
Tensile Strength (MPa) | ≥1080(110) | ||
Yield strength(MPa) | ≥930(95) | ||
Elongation(%) | ≥12 | ||
Reduction of area(%) | ≥45 | ||
Akv (J) | ≥63 | ||
Impact roughness(J/cm2) | ≥78(8) | ||
Hardness | ≤217HB | ||
Specimen size | 25mm |
Surface Treatment: painting,plating,polishing,black oxide,transparent anti-rust oil
Heat treatment: Normalized / Annealed / Quenched / tempered
Processing
Electric arc furnace melting→refining furnace→vacuum treatment furnace→
→cast ingot→steel ingot anneal→ heating → high-speed forging, refining
forging→annel,retarded cooling,air cooling→quenching and tempering
treatment→finishing operation→test→finished products
Application:
Foodstuff, gas, metallurgy, biology, electron, chemical, petroleum, boilers, nuclear, energy, construction field, ships building industry, war and electricity industry, boiler heat exchanger, machiner and hardware fields and medical equipment, fertilizer, etc.
Symbol of Class |
Chemical Composition % | ||||||
C | Si | Mn | P Max. | S Max. | Cr | Mo | |
SCM 415 | 0.130.18 | 0.150.35 | 0.600.85 | 0.030 | 0.030 | 0.901.20 | 0.150.30 |
SCM 418 | 0.160.21 | 0.150.35 | 0.600.85 | 0.030 | 0.030 | 0.901.20 | 0.150.30 |
SCM 420 | 0.180.23 | 0.150.35 | 0.600.85 | 0.030 | 0.030 | 0.901.20 | 0.150.30 |
SCM 421 | 0.170.23 | 0.150.35 | 0.701.00 | 0.030 | 0.030 | 0.901.20 | 0.150.30 |
SCM 430 | 0.280.33 | 0.150.35 | 0.600.85 | 0.030 | 0.030 | 1.001.50 | 0.150.30 |
SCM 432 | 0.270.37 | 0.150.35 | 0.300.60 | 0.030 | 0.030 | 0.901.20 | 0.150.30 |
SCM 435 | 0.330.38 | 0.150.35 | 0.600.85 | 0.030 | 0.030 | 0.901.20 | 0.150.30 |
SCM 440 | 0.380.43 | 0.150.35 | 0.600.85 | 0.030 | 0.030 | 0.901.20 | 0.150.30 |
SCM 445 | 0.430.48 | 0.150.35 | 0.600.85 | 0.030 | 0.030 | 0.901.20 | 0.150.30 |
SCM 822 | 0.200.25 | 0.150.35 | 0.600.85 | 0.030 | 0.030 | 0.901.20 | 0.150.30 |
Note : As impurities, Ni and Cu shall not exceed 0.25% and 0.30% respectively for all grades. |